PRODUCTS | WIDE BODY

Hydraulic Ground Power Unit
HGPU | Low noise level, easy to maintain and operate & low cost of ownership

Wide Body | Maintenance and revision check systems, filling and draining aircraft reservoir & flushing of the hydraulic system

If you are looking for support on your long range/ long haul aircrafts, Hycom has the perfect selection of GSE Hydraulics for your fleet. Make your selection below or contact Hycom Sales for personal advise.

General technical features Wide Body HGPU

Hycom Hydraulic Ground Support Equipment can be supplied with either an electric motor or diesel engine. Clients can also customize specific wishes. In the separate PDFs you will find the specific characteristics of our standard units by plane type.

  • Pressure range: 300-3000 psi, 4000 psi at reduced flow
  • Current standard: 400/690 V – 50 Hz, other on request
  • Axial piston pump variable stroke with proportional control of flow and pressure
  • Boost pump for closed loop circuit
  • Pressure filter 3 micron absolute, boost filter 10 micron absolute with electric clogging indicators
  • Fluid contamination level NAS 1638 class 6 or better
  • De-aeration and flushing valve
  • Stainless steel reservoir of 240 ltr. with drain valve and filling cap
  • Air/oil cooler with low noise level suitable for tropical conditions
  • Analogue pressure gauge 0-5000 psi in pressure and 0-200 psi in return line. Accuracy 1% of f.s.
  • Digital read out of actual flow suitable for TARAN or ITCAN leak test procedures. Accuracy 0,3% of measured value
  • Flow setting by potentiometer. Set flow display will indicate the value of selected flow
  • Pressure setting by push button + and -, 3000 psi pre-selection push button
  • Temperature and boost pressure shut down switches, emergency shutdown button
  • Heavy duty frame with drip tray. Hydraulic and electric components completely isolated from each other
  • Allowable towing speed 16 km/hour, parking brake on front wheels by placing tow bar in upright position
  • Tie down/lifting points. Forklift pick-up points

Exterior
Wide Body

  • Operator panel with graphic lay-out, display with maintenance and failure indication given in clear text and with protection cover
  • Hydraulic hoses with length of 9 or 12 mtr.
  • Heavy duty frame with drip tray. Hydraulic and electric components completely isolated from each other
  • Canopy out of steel, spray painted with skydrol resistant paint
  • Weight 2600 kg, dimensions 3230 x 1750 x 1625 mm
  • Option: Quick disconnect couplings to connect hoses to the aircraft

Electric
Wide Body

  • Single or dual system with one pressure and one return line
  • Noise level: less than 75 dB(A)
  • One or more in- and outlets with shut off valves
  • Power connection: 125 amp - 50 Hz/100 amp - 60 Hz, cable 12 mtr

Diesel engine
Wide Body

  • Single or dual system with one pressure and one return line
  • Noise level HT2000-1-F-S: less than 85 dB(A) at 2 mtr. distance
  • Engine make Deutz
  • Installed power: 80 kW depending on the flow range
  • Fuel reservoir suitable for 8 hours of operation
Video

Hydraulic ground support equipment HT2000 for aircraft maintenance

Safe, reliable & effective hydraulic solutions?
Get in contact

Fout: Contact formulier niet gevonden.